Thursday, August 16, 2012

8-16-2012 - Calibration Error

Calibration wouldn't go through, error message:


Couldn't complete the full color calibration.

Error message: High voltage error successfully recovered!
Check output tray for any poor-quality printouts and resume printing.

Hard shut down and restart the press one time, restart press software one time.

Hi Randy, this error is usually due to really old or bad bid.

I unchecked the "Velectrode calibration", and the calibration went thru.

yes, but all t5hat's doing is skipping the v-electrode calibration which is the charging unit insi9de thge bid.

Which one of your bids has the most impressions.

Yellow, also on the calibration result, it says yellow failed.

Then yellow bid is the likely culprit.  The issue should be resolved after a bid replacement.

OK, i'll replace the yellow bid.

Case # 680223274

update:

Replacing the yellow bid didn't resolved the issue, re-calibrate 2 colors at a time, yellow still didn't pass, so as white.

2 comments:

  1. I'm still facing the BID high voltage error especially on Black and all i have to do is to everything in EPM and some colors will keep not coming out perfect.

    ReplyDelete
  2. Thanks and I have a keen provide: What Was The First Home Renovation Show custom home remodeling

    ReplyDelete