Tuesday, August 21, 2012

8-21-2012 - Magenta ink flow is too high

Did the monthly maintainence routine, after cleaned all the ink pumps, put everything back, start-up the press, got the Magenta ink flow is too high.

After running the ink flow wizard, it says to close the valve half a turn, until the reading is right.

what to do is the ink pump is behind the ink cans, if you look thru the holes underneath the ink cans, you see a flat head screw, use a long screw driver and turn it clockwise 1/4 of a turn each time and test, until the reading is correct.

No comments:

Post a Comment