Wednesday, September 5, 2012

9/5/2012 - Perfector vacuum level too high

Perfector vacuum level too high at 0.76, should be at 0.65.

Case# 4681541895 spoke to Clint at HP.

Go to Diagnostic/substrate/Vacuum/ click the pump to see where is at.

Go to the back of the press, open the oily waste door, adjust the knob that has the spring, turn counter clock wise  1/4 turn at a time.

Go to Diagnostic/substrate/Vacuum/ click the pump to see if the level is at 0.65.

No comments:

Post a Comment