Monday, October 29, 2012

10/3/2012 light strip on prints

PIP wasn't printing up to the proposed impressions, around 25000 to 32000 when it should be around 65000.

There is an about 9mm lighter shaded strip measures about 65mm from the edge of paper.

Usually replace the PIP will resolve the issue, but I thought there must be something wrong that causes the PIP to go bad before it's intended lifespan.

Called HP support, Case # 4683563483.

Things checked:

- Check and run the Cleaning station calibration, and see if the PIP is getting enough imaging oil.

- Check the tray underneath the cleaning station to see if loose.

2 comments: